Kinkelder HSS Cold Saw Blades
ALPHA Cold Saw Blades
Cold Saw Blades from Kinkelder BV of the Netherlands. Alpha Steam Treated cold saw blade has a blue oxide surface layer for a longer blade life compared to the uncoated saw blade. It’s main use is for cutting steel, stainless steel on manual and semi-automatic cold sawing machines.
Applications: All materials like tubes, profiles and solids • All structural steels and non-alloy tool steel with a tensile strength up to 700 N/mm2 • Suggested cutting speed: 30 – 60 m/min • Machines: manual, semi-automatic.
Suitability: Australia’s largest range of HSS cold saw blades with bore and pin holes to suit all major machinery makers. Made to suit Pedrazzoli-Bewo-Bramley-Waldown-Haberle-Macc-Mep-Metalmaster-Omes-Bewo-Pedrazzoli-Thomas and Brobo saws.
STEAM-EX
Kinkelder Steamex Cold Saw Blades have a thin layer of high-tech coating protects the Steam-eX saw blade against wear on the sides. This ensures a long blade life, fewer blade changes and an improved surface finish.
Advantages: Double blade life compared to steam treated blades • No side pick-up
Applications: All materials like tubes, profiles and solids • All structural steels and non-alloy steel with a tensile strength up to 700 N/mm2 • Suggested cutting speed: 30 – 60 m/min • Machines: manual & semi-automatic cold saws.
Suitability: Australia’s largest range of HSS cold saw blades with bore and pin holes to suit all major machinery makers. Made to suit Pedrazzoli-Bewo-Bramley-Waldown-Haberle-Macc-Mep-Metalmaster-Omes-Bewo-Pedrazzoli-Thomas and Brobo saws.
EC 3000
Kinkelder EC 3000 cold saw blades are the most cost effective due to a sophisticated PVD coating for wear protection. This coating has been developed in order to achieve a very low friction coefficient at a low cost level. Also suitable for cutting stainless steel.
Advantages: Cuts much faster and has a much longer blade life than the steam treated blade • No side pick-up • Good wear protection due to the smooth coating surface
Applications: All structural steel and non-alloy steel thin walled tubes • Tensile strength up to 600 N/mm2 • Suggested cutting speed: 60 – 120 m/min • Feed: 0,03 – 0,09 mm/tooth • Machines: manual, semi-automatic and cold saws.
Suitability: Australia’s largest range of HSS cold saw blades with bore and pin holes to suit all major machinery makers. Made to suit Pedrazzoli-Bewo-Bramley-Waldown-Haberle-Macc-Mep-Metalmaster-Omes-Bewo-Pedrazzoli-Thomas and Brobo saws.
SOLAR
Due to the higher oxidation temperature TiN coated Solar cold saw blades allow cutting of materials with high tensile strengths with the coating extending to the hub.
Advantages: Increased blade life compared to steam treated blades • Higher cutting speed rates
Applications: All materials like tubes, profiles and solids with a tensile strength up to 750 N/mm2 • Suggested cutting speed: 80 – 140 m/min • Feed: 0,04 – 0,09 mm/tooth • Machines: manual, semi-automatic, automatic.
Suitability: Australia’s largest range of HSS cold saw blades with bore and pin holes to suit all major machinery makers. Made to suit Pedrazzoli-Bewo-Bramley-Waldown-Haberle-Macc-Mep-Metalmaster-Omes-Bewo-Pedrazzoli-Thomas and Brobo saws.