Kinkelder Tubemill TCT Sawblades

xforce-cutting-400x300-cropped

TUBEMASTER

Increases uptime of ERW tube line

Key features of the TubeMaster saw blade are fracture-resistant carbide tips, protected with a high-tech TiAlN-based PVD coating. Combined with a light cutting geometry, which eases chip removal, a milled like surface finish is assured. This geometry also reduces vibration when cutting thin walled tubes (<4mm), thereby achieving excellent blade life.

Advantages:

  • High line speed
  • High blade life
  • Cuts high tensile API Pipes (up to 110 KSI, X80, HT)
  • Burr free cut

Applications:

  • Orbital, flying cut-off applications
  • Suggested cutting speed = 350 – 400 m/min.
  • Feed: 0,04 -0,12 mm/tooth.
  • TubeMaster saw blades are available in diameters from Ø300 up to Ø420 mm for all types of orbital cutting machines, such as MTM, OTO mills, Elmaksan, Kusakabe, Linsinger and SMS Meer.

 

 

kinkelder-tct-scarfmaster.jpg

SCARFMASTER

Cuts heavy ID-Scarf

ScarfMaster is a PVD coated carbide tipped saw blade featuring a very specific tooth geometry, while tips themselves are made of a highly shock resistant type of carbide. The teeth are supported by a saw body with extra strong shoulders, which give the combination tooth/body very high stability and fracture resistance and therefore extended blade life .

Where cutting speed limits of coated HSS saw blades have been reached, SpeedMaster saw blades provide an effective solution.

Advantages:

  • High line speed
  • Increased uptime
  • High blade life
  • Cuts heavy ID scarf
  • Cuts high tensile API Pipes (up to 110 KSI)
  • Various tooth geometries available

Applications:

  • Flying cut-off application dealing with heavy ID Scarf
    Suggested cutting speed = 450 m/min
    Feed: 0,04 mm/tooth
    ScarfMaster saw blades are available in diameters from Ø450 up to Ø600 mm for Flying cut off machines, such as MTM, OTO mills, Nakata and Olimpia.

kinkelder-tct-speedmaster.jpg

SPEEDMASTER

Single and Twin cut-off: no ID-scarf

SpeedMaster is a TCT saw blade for flying cut-off applications on tube mills. It provides an opportunity to greatly increase the tube manufacturing line speeds and cut the production costs.

Where cutting speed limits of coated HSS saw blades have been reached, SpeedMaster saw blades provide an effective solution.

Advantages:

  • Extremely high line speed because of very short cutting times
  • Very good surface finish, burr-free cut
  • Increased uptime

Applications:

  • Single and twin flying cut-off machines designed for TCT cutting with small or no ID-scarf
  • Tubes with a tensile strength up to 1800 N/mm2
  • Suggested cutting speed: 200 – 600 m/min